Analysis

Treasure trove of housing data held by councils

🕓 4 min read
1 May 2026
NZ housing_2.jpg

What do Kaipara, Kawerau, Otorohanga, Christchurch and Selwyn have in common? They all make their district valuation roll (DVR) available to the public through LINZ’s NZ Properties dataset. The DVR includes records on every property, including building age, building size, value, zoning and location. Due to restrictive access policies, DVR data is typically only used for setting rates, but it has immense value for understanding the housing condition and housing market dynamics, as well as commercial and industrial land. In this weeks’ insight, we dive into Christchurch City’s DVR data to highlight what is possible, and encourage more councils to share their DVR data.

Dwelling age tells story of city’s development

Firstly, the DVR provides a valuable base of descriptive statistics for Christchurch City. Chart 1 shows that the city still has a handful of suburbs dominated by dwellings built in the 1950s and earlier such as Middleton, Lancaster Park, Beckenham, Woolston West and Mareihau South. Unsurprisingly, these old suburbs are all relatively close to the central city, compared to newer suburbs built since the 2010-11 earthquakes such as Kennedys Bush, Halswell West, Yaldhurst, Marshland and Prestons.

Newer dwellings less mouldy – but not always

Connecting the DVR data with other sources like census can reveal interesting relationships. In Chart 2, we look at the average year of construction for dwellings from the DVR together with the self-reported presence of mould from the 2023 census. Looking at suburbs where more than 10% of the dwellings are mouldy, more than half of these have dwellings dating back to the 1970s. By contrast, for suburbs where less than 5% of the dwellings are mouldy, the oldest is Redcliffs, with their average dwelling built in 1987. Suburbs that don’t fit the relationship are interesting too – such as Beckenham – with the city’s oldest housing stock (average dwelling dates back to 1955) have a rate of mould (7%) below the citywide average (9%).

Christchurch is unusual in that its housing stock had considerable insurance-funded investment for repair and rebuild after the 2010 and 2011 earthquakes. Without this investment, older housing may have degraded further and become even more mouldy.

Limited cross over between residential, commercial and industrial land values

Beyond dwellings, DVR data also contains insights into commercial and industrial properties, and how their land values relate to residential properties. Focusing on the 23 suburbs of Christchurch City with residential, commercial and industrial rating units, Table 1 shows the range of land values ($ per m2) for each. Unsurprisingly, the city’s most valuable land is in Christchurch Centre, where land used for residential purposes is worth $28,600/m2, and land used for commercial purposes is valued similarly at $24,800/m2. Land for industrial purposes in Christchurch Centre is valued considerably less at $11,100/m2, which could reflect limitations preventing its use for more valuable residential or commercial purposes. Nonetheless, Christchurch Centre’s industrial land is worth considerably more than industrial land elsewhere in the city, such as $3,400 in the industrial stronghold of Hornby-Islington.

Although land for residential use is typically most valuable, in some suburbs commercial land is worth more than residential, which may reflect a shortage of suitable commercial land compared to residential land. In Lyttelton, commercial land is worth $9,700/m2, 44% more than residential land.

Limitations

DVR data is assembled and maintained for a single purpose – setting rates – so it’s important to bear its limitations in mind when using it for other purposes. The focus of the DVR is to assess all properties across a community in a consistent way, not to be a detailed property-by-property record. Anyone who has purchased a house will be well aware that rating values are a useful starting point, but are rarely a perfect predictor of the sale price of a specific property. For research, the DVR is most valuable for looking across communities, not individual properties.

Opening up the DVR

Councils can choose to make their DVR publicly available by notifying LINZ. LINZ already holds DVR data for all councils, but access is not public by default. Having a publicly available DVR means that third parties can easily use this data to generate research and products specific to the local area. In our experience, obtaining the DVR directly from councils ties up council staff, leads to inconsistent data structures, and in many cases comes with a large price tag. For researchers and consultants like ourselves, having access to a nationally consistent dataset means we can develop products and analysis for all of New Zealand at once, not council-by-council, which ultimately means better value for councils and other clients. Some councils choose to withhold bulk access to the DVR dataset in preference to selling or licensing it, but this means that local research and monitoring comes with a higher price tag.